There’s a reason people say officers are class traitors. Policing has never been about protecting the public; It has always been about suppressing the masses and protecting the elite.

You say you’re 54, so by the study’s definition, you are Gen X, and are thus about twice as likely to have never been present for a mass shooting as a Millenial, about three times as likely to have never been present at a mass shooting as Gen Z.
See Table 3.

Exactly. I’m in my mid 30’s and know several people who have witnessed mass shootings. I have personally been under active shooter lockdowns multiple times. Hell, my former roommate was shot in the ass by one at a music festival. This person saw “7% have witnessed an active shooting” and immediately called bullshit, because they’re part of the other 93% and are incapable of imagining anything outside of their (extremely narrow) lived experience. And that’s some real boomer attitude.

It’s not even safe for many Americans. But what other choice do they have, when leaving is so prohibitively expensive and they’re trapped living paycheck to paycheck?

It always is. That’s how their entire business model functions.

Ding ding ding. This is just a talking point so they’ll be able to pivot into “we should give Musk a trillion dollar contract to run GPS on his Starlink satellites.” Hammer the “GPS is unreliable” point long enough that the conservative voters have time to start believing it. Then pivot into handing more money to Musk. It’s a typical advertising strategy; Create a problem so you can sell the solution.

Just out of curiosity, why bother running 4 instances of qBit for the various *arrs? Why not just use automatic torrent management, and have the different categories download to different folders? My *arrs are all using a single instance of qBit, and each service simply uses a different category with a different download path.

The benefit is that I can see my total up/down speeds, ratios, etc very easily without needing to change to an entirely different instance. I can filter by category, or see everything at the same time.

Yeah, I just wish there was a way to automatically update the port whenever it changes. It doesn’t change often since my server tends to stay on 24/7. But when it does change, it would be nice to have it automatically update.

Back before my current server, I was just messing around with it in Windows. I discovered that qBit actually stores the forwarded port in the registry, and PIA has a terminal command that can print the currently forwarded port. I tried to write a quick .bat script to automatically run when the PIA network adapter connected. The goal was to grab the port number and update the registry for qBit any time the internet went out or my server was rebooted.

And it seemed to work fine. It launched when PIA connected, and pushed the new value to the registry. But that forwarded port was also apparently being stored somewhere else as well, because just updating the registry wasn’t enough; When qBit launched it still showed the old port number, even though all of the documentation I found said it was simply a registry value. At that point I just gave up and manually updated it every time I turned my computer on.

Yeah, my car shit the bed right before the election and I had to get a new one.

Looking back, I’m glad I got it when I did. It was manufactured in Mexico, like most cars in America. If my old car had lasted 6 more months, I might have ended up paying 25% more for what I’m driving now.

I mean, open source projects can be started or based in the US. But that doesn’t mean it’s an American project; it’s just that the people who started it happened to be American.

I guess if we had to point to a specific American OSS, maybe Tor would qualify? It was initially developed by the CIA, so that may qualify it as US OSS. But it has since taken on a life of its own and the CIA doesn’t have any hand in active development anymore… So it’s still hard to say that even “being made by the literal US government” qualifies an OSS project as “American”.

It’s sort of a Ship of Theseus situation. At what point in the development process do we consider it a non-American project?

You actually can’t sell third-party printers legally, because all printers will include an ink fingerprint which can be traced back to that specific printer. So if someone prints a ransom note or counterfeits cash with it, the FBI will be knocking on their door by the end of the day.

There’s literally a certification process to be allowed to sell printers, and one of the biggest criteria for that certification is agreeing to maintain that fingerprint database. One of the other big criteria is that the printer needs to be able to recognize and refuse to print images of cash, to prevent counterfeiting. If you try to print an image of a dollar bill, the printer’s firmware will refuse to continue the print job. The issue is that this certification process also ensures there’s a de facto near duopoly on printers, which leads to BS like HP making it increasingly difficult to use affordable ink. They can be blatantly anti-consumer, because they’re protected from any competition.

There’s a reason HP hasn’t already been priced out by some cheap Chinese competitor who is able to undercut the competition. And it’s not because of the difficulty in manufacturing or the price of components. It’s because no other companies are allowed to sell printers.

I bought a bidet like six years ago (right before the pandemic) and Amazon is convinced I need to buy another one every single week. How many toilets do you think I have, Amazon?

The funny part is that there’s very little reason to actually buy a barrel of lube. In porn, they just mix their own lube using distilled water (available cheaply from virtually any grocery or hardware store) and a dissolvable powder. There’s not a good reason to ship wet lube in bulk, because freight shipping is calculated by weight and you’re essentially just paying to ship water. The added benefit is that the porn makers can mix the lube to be a thinner or thicker consistency, depending on their specific needs.

For the curious, look up J-lube, X-lube, K-lube, or Fist Lubricant Powder. And yes, all of the above are available for purchase on Amazon.

And to drive the point home that you’re just paying for freight shipping… J-lube powder is currently $26.77 for 10oz, which makes 10 liters of lube when mixed per the manufacturer’s recommended dosage. So $26.77 for 10 liters, plus probably $3 for the distilled water you need to mix it with. Let’s round up to an even $30 in total. The barrel is currently $1775.32 for 7080fl.oz, or ~209.4 liters. So the barrel is ~$8.47 per liter, while the dry powder mix is ~$3.00 per liter. The barrel is almost 3x as much per liter as the dry powder.

Where I live, everyone used AOL Instant Messenger, or AIM for short. It was popular with teens because it offered chat rooms, but that meant it was also a popular hunting ground for predators. Nearly every terminally online teen from the late 90’s and early 2000’s has a story about getting groomed on AIM, by someone they initially thought was their own age.

Then Google Chat and Facebook Messenger came along, (and AOL’s subscriber count began to dwindle as people moved to broadband internet) and it was almost completely dead by 2010.

I once had a problem that wasn’t caused by caching. It was caused by Accounts Payable forgetting to pay the internet bill, and the ISP cutting our service halfway through a network test. So the beginning of the test cached that the network had internet access, but then the end of the- wait fuck it was caused by caching

I can’t believe this is relevant…

Lemmy has a lot of really outspoken FOSS enthusiasts. It sort of goes hand in hand with the whole “anyone can spin up their own instance” idea that Lemmy is built upon. Same reason there are so many Linux users here. But that also means you need to take any sort of “just switch to the FOSS version it’s basically the same thing” posts with a grain of salt.

Yeah, OP is over here with like 4GB of RAM, wondering why their drive is getting hit so hard. It’s cuz you’re totally out of RAM, and the OS is using the disc instead.

Downloads definitely haven’t been removed. I use it virtually every day to watch stuff on my iPad at work.

I run both Plex and Jellyfin. Jellyfin is ready for everyone who doesn’t have to deal with the Mother-in-Law Factor. Plex has an easy setup process, and I could walk my MIL through it on my phone. In 5 minutes, her TV was connected to my server.

Jellyfin isn’t to that point yet, and likely never will be. Since there’s no centralized server for an app to phone home to, there’s no way to create a unified account creation/login experience. Jellyfin is nice as a “just for me” server. But as soon as I have to help others use it, it becomes a nightmare. Walking my MIL through setting up Jellyfin on her TV was the reason I re-installed Plex in the first place.

I had finally converted my wife away from using paid streaming apps, and dealt with all of the “Why do I have to use three different apps to access it on my three different devices? They all look different and are harder to use” complaints. By the time it got around to my MIL, I was tired of dealing with it and just reinstalled Plex so people could have a consistent experience.

I still use Jellyfin for my personal viewing because I prefer it. But saying “just ditch Plex, Jellyfin is ready now” is a little disingenuous. Jellyfin is ready for the people who want to use it. But if you’re trying to convince people to ditch their streaming apps, you’re fighting a lot of social inertia. You need to be able to provide a consistent experience across their different devices, with a decent login experience. And Jellyfin definitely isn’t there yet.

Yeah, I think it was a permissions issue. ABS seemed to be working properly, but it couldn’t read or write anything on my NAS. It would appear to work when it was running, but nothing was permanently saved; Everything got wiped when the machine rebooted.

After some googling, I found some others having similar issues. And the only real answer I was able to find was basically “lol don’t use a NAS”. But that doesn’t work for my setup, because my server only has a small drive for the OS.