Yes, the output is continuous as it runs and if it crashes it just stops putting out data. The cool thing is you can capture the error codes and back end details so you can often gain an insight to what is failing and why. It may have something like a device not being ready or a library failing to load, but because the range of possible errors is so large the developers may not have a GUI way of showing them. I would recommend taking each of the last few lines one at a time and searching them in your favourite search engine with ardour at the front, like “ardour ERR: glibc not found” or something like that. If someone has the same issue they may have found a solution that works for you.

Run it in a terminal and pipe the output to a text file.

~/> ardour > output.log

Something like above. That will give you the text output up to the crash and hopefully have useful information like an error code or fault warning.

OK so I can definitely see why it would seem pointless or really narrow, but I think this would have actually been very helpful for me and people like me. I have dyspraxia, a coordination disability. Mine is specifically graphomotor, meaning the exact types of movements involved in writing. My handwriting was absolutely terrible, causing pain in my hands (I also had incomplete hand dominance, so yay, both hands sucked equally), inability to express in a written form, and difficulty with tasks like painting, drawing, sewing, and cooking. Over the years the most helpful things were gaining strength and switching to printing only, no running writing at all.

If this tool could help with increasing the feedback from my hands to my brain and also push my fingers through the shapes of letters I think I would have had some benefit. I think people who have had a stroke may also potentially benefit, though obviously it would need thorough testing.

What do you do with a faulty RAID drive? Early in the morning!

I disagree. The current setup is like having the real estate have a key and you have a swipe card. The swipe card let’s you into parts of the house but you don’t have access to the basement or electrical box. If you wanted access to those you could ask but the real estate basically says no unless they really messed up, and even then they send a tradesperson to do the work and give them the key. If that tradespersons loses the key or gives it to someone else the real estate shrugs and says “What do you want us to do about it? Security is hard.”

They also have a contract for all the furniture, most of which is bolted down, so you can’t even rearrange your house, let alone install a hand rail in the bathroom for your disabled brother who needs support getting in and out. You also can’t install anything on the walls like a TV or a picture frame, and attempting to do so would lead to the possibility of piercing a pipe or cutting a wire in the wall because you don’t have schematics.

You can’t put a different OS on, you can’t modify the one you have, and breaking any of the protections on software is a violation of the DMCA, so you are a renter. You rent the device, they control the features, they decide what parts are available to the public (usually none), they decide when it will be end of life, and they make it very technically difficult to repair anything by using parts pairing. If they sold the device as a subscription with hardware upgrades included, repairs included, ongoing support included, then maybe locking it down would be OK, but otherwise no, it is unreasonable and I don’t think we really own our devices in a meaningful sense.

This is simply incorrect. Implementing a lock on a bootloader is not dissimilar to a lock on your house. A person breaking in doesn’t care that they are breaking the law, they just need to find the how of breaking in. If I as a consumer want to enter my house or give a copy of my key to someone else as a backup I should be able to do so. If I want to leave my door unlocked I should have that right however foolhardy it is. And when it comes to locking the bootloader of a computer most people won’t notice it in general use but that isn’t the point. It is about the edge cases, the end of life for the device, the lack of security updates.

And a much smaller footprint. It could even be binary data for tweaking your algorithmic profile, say the name of a branded product or in the case of a product with few options just the type of item. Audio runs in the megabytes per minute, transcripts in the kilobytes, but reducing to a conclusion of interest in a single specific item is really very small, hard to notice tbh.

No worries, have a good one!

OK, so watches come with a few different standards for the pin length, the gap between the two metal rings that watch pins pop in to. The pine time seems to use 20mm bands, so searching for those on your internet purchase place of choice is the next step.

https://pine64.org/documentation/PineTime/Accessory/Watch_band/

The documentation links to a couple of options in the link above, but any of the bands for a galaxy watch which are 20mm will do just as well. All you need is to make sure the pins are for a 20mm watch and the rest works itself out. Good luck!

The claim by Meta that they block this type of material combined with the existing spread of this type of material mean that adding a temporary source of material does not carry the same level of harm as may be expected. Testing if Meta does in fact remove this type of content and finding it failing may reasonably be expected to lead to changes which would reduce the amount of this type of material. The net result is a very small, essentially marginal increase in the amount of self harm material and a fuller understanding of the efficacy of Meta filtering systems. If I were on the ethics board I would approve.

I think piecemeal is a good way to go. Switch from MS Office to LibreOffice, from iOS to android, from Photoshop to Krita, then go to dual booting Linux (probably Mint or similar) with Windows, learn more using both, find what things you reboot to Windows for, find solutions for those using Wine and alternative software, get used to solving problems in Linux land and learn the tools. Once you are comfortable with a mix of both get rid of what you can, use Windows less and less, try CalyxOS or Graphene for your phone if possible, keep making steps. Each step makes progress, and imperfect solutions are a better starting point for finding better solutions.

That said, for the earliest steps a virtual machine is an amazing tool, as is an old laptop. You can learn to solve problems on virtual or real hardware without making your life harder then inch closer to freedom. I’ve been using Linux since 2006 and honestly it has been a constant learning process. The first year was mostly VM learning, then an accidental install on my external HDD taught me about hubris and data protection. Since then I have kept moving towards more open hardware and software one step at a time. Getting started is the key, nothing teaches as well as trying.

What OS do you use? Windows, Mac, Linux? And same for your phone? Android? If so, you should be able to get it set up on your desktop and phone.

First, get it installed on your desktop. For windows and mac go to the Syncthing download page and grab the installer. On Linux you will find install instructing below, but basically use your package manager to install syncthing.

Once it is installed you can start it up and it will open a GUI, most likely through your web browser (probably 127.0.0.1:8384 or similar). From here you will have your Syncthing interface for your computer set up, so on to the phone.

On your phone install syncthing from whichever store you use, fdroid is my favourite. Once installed open it and you should have an option to add another device. You can use this to scan the QR code on your computer Syncthing interface.

Good idea is to use something like Syncthing to copy data between your phone and another device like a laptop or another phone. This depends on the app, for Drip you have to manually export the data yourself on a regular basis.

Another useful idea is if you have an old phone lying around get it connected via Syncthing and back up everything to it. If your current phone dies or is lost you can switch back immediately, a hot backup. If you have root on your device you can use NeoBackup to schedule backups of the data into a folder Syncthing can access and send to backup locations, say a home computer or spare device.

And the fashion, oh wow, such an aesthetic.

Trashing!

Not entirely certain where the issue is coming from, but for most laptops the install should finish without all of the drivers just running in the included minimal set. If you can finish the install you should be able to do drivers after that and it should all be happy.

That said, an alternative is using a virtual machine. If you only use a few programs this may be a much more reliable and stable way to run Windows apps without messing with dual boot and drivers etc. The Virtualbox install is super easy and drivers are installed using the guest tools iso, so it is really simple to have fairly good graphics performance with limited overhead. You can also snapshot the image and have a known working state before updates, so if they gank something during the update you can just roll back and put off the update. Very handy for mission critical tools.

I don’t know about videos but having a look at the OSI model is a good way to start. It covers the abstract framework for packetizing data including things like the distinction between hardware and software, envelope, encryption, application layer stuff, the whole shebang. The cool thing is by going hardware, network, application you can see where responsibility are and it helps you understand where things can go wrong.

If you are interested there are plenty of CCNA style courses available on the internet, licit and otherwise, and they go into more depth, and the same applies to RHCE/RHCSA material. The training for certifications like that covers what you want to know but also puts it in context, and again licit and otherwise sources are available.

I work in disability support. I leave the house, drive to my client, then don my mask and wear it until I leave the client and get back into my car. If I have a client all day I can just wear the mask all day, eating before and after my shift. I have not gotten a cold, flu, or other disease for the last 4 years and I have worked with people who actively have covid, influenza, RSV, and other illnesses.

My mask is a pm 1.0, so a little better than pm 2.5 which is what n95 is, and it works very well. Honestly I can’t see me changing my behaviour around masking ever. I don’t get sick, I don’t carry illness to vulnerable clients, and I don’t have to change my behaviour day to day so habit is solid and easy to maintain.

While it didn’t help my endocarditis last year it has definitely protected against covid and even now I have not gotten it once. I think it is a good deal overall.

Something worth noting is that this is yet another example of how the patriarchy hurts people. She felt that her image on Instagram was so important that she took risks which ultimately lead to her death. She doesn’t have to be an idiot to have this happen, I’ve done tonnes of stupid dangerous stuff in my life and I’m fairly sure everyone else here can think of a few things that could have gone wrong.

The algorithm of something like Instagram is built around enhancing use of the platform. This is the same fundamental motivation as tobacco companies or gambling companies. Your continued use of the product is essential, even if it is harmful to your health. So they design their product to enhance it’s addictiveness and market to people who are vulnerable, say younger women for example, and boom, revenue.

Meta has a meaningful hand in this type of situation. The same goes for all the other attention economy companies. Their product doesn’t have to be harmful but it is way more profitable if harm is not a consideration.

Root your phone and you can manage which APN is used by tethering. If you can’t do this consider trying a connecting to a VPN before enabling tethering, the connection will on some devices remain active on the normal APN because changing would disconnect the VPN and keeping connected is higher priority than updating the APN. Also USB tethering and WIFI tethering may behave differently.

In the end this is a good argument for better regulation. When you buy a car they don’t get to extract more money from you because you drive out of state or use it for business. The fact that telecommunications companies have so much power and access to basically monitor what you are doing and bill accordingly is insane. You should pay for a service with a simple and clear contract and all this crap should be made illegal.