I would recommend PoE security cameras. You probably want support for RTSP / ONVIF.

I have some Amcrest cameras talking to Frigate. It is completely local—cameras on a separate VLAN that can’t talk to the Internet, footage is recorded on a server running Frigate. Works very well for me. No vendor lock-in is also nice!

So, was it Griffiths, Purcell, or Jackson that got you?

640k 780k ought to be enough for anybody…

I know right? What a poser!

/s

In a VHCOL area, $100k with one child is extremely tough/you’re likely dipping into savings. Our daycare alone is over $40k/yr per kid, and only $5k ($7500 next year) is fully tax exempt.

Median 2 bedroom in my area is over $50k/yr.

$100k doesn’t cut it. “Just move to a cheaper area” is IMHO not a proper response to this—anyone who works in my city should be able to afford to raise a family here, with a high quality of life/standard of living, but that’s not really the case.

Economically mediated de facto sterilization is an extremely dystopian thing to just accept. I think it’s pretty justified to be more or less outraged in this case.

I used Photoprism years ago, so my knowledge is probably pretty outdated.

My experience of Photoprism was that mobile was not tightly integrated. At the time I used Syncthing to sync photos — it worked ok for me, but I wasn’t going to set it up on my partner’s phone, for example.

Immich Just Works on both mobile and desktop. Multi user is great, sharing is great, and the local ML and face detection work remarkably well.

Whatever works for you is the best of course! Immich fits the bill for me, and it was very much worth it for me to “buy” it.

xscreensaver of course! Note that this is not an option on Windows—jwz hates Microsoft, and any xscreensaver port to Windows is against his wishes.

I use yabai and sketchybar for a tiling WM feel. It’s nowhere as nice as my preferred i3, but it’s ok. Unfortunately it often breaks with major OS updates, so I’m sure to hold back updating my system until yabai is working.

IIRC sshfs will work on macOS but it’s more work to install. Worth it if allowed by your IT policies and your work can benefit from it.

Vim, tmux, and the usual *NIX stuff you might want.

The coreutils are not the GNU coreutils you typically find on a Linux system, so you may find a few differences. I believe sed is slightly different, and the flags for ls must be before the filename arguments, but I’ve found it’s mostly silly stuff like that (I used zsh before using macOS, so no problem there).

Regarding DNS servers, what router do you have? Some routers have simple enough DNS capabilities — I have a MikroTik, and have it set up with DNS entries for internal services (including wildcard). Publicly accessible services just use my registrar’s DNS (namecheap — no complaints).

Oracle Free tier, amd64. Only use it because it’s free—limited bandwidth, but given I have slow upload at home it’s never really been a bottleneck. Hate to admit it given it’s Oracle, but I’ve been completely happy with it.

If I switch to a paid VPS I will probably go with racknerd (suggestions welcome though if you have thoughts).

Especially after adding in all the power draw of the automation requires…

What exactly is the incremental power draw for automation? My network gear and server (a little nuc) are sunk power costs as I self host other services.

Idling, my home uses around 100W with the fridge off. One 10W light is an additional 10% of my power budget, and I have a lot more than one light in my house. I also pay about $0.40/kWh.

I can be a bit neurotic about turning off lights when I leave a room, so Home Assistant was a nice way to free up brain space for me. A few motion sensors here and there + some simple automations, and the lights mostly handle themselves. Zigbee sensors and Zigbee or Matter-over-WiFi bulbs, so everything is local. A free VPS+WireGuard setup means I can access them remotely should I need to, with TailScale as a backup.

Cloud failures mean I can’t access remotely, but local control is unaffected—if my smart devices stop working it’s almost certainly my fault :)

Matter is also local—provisioning can be a PITA but once done I’ve been pretty happy with even the cheap Matter WiFi smart bulbs. Home Assistant supports them very well.

Cheap bulbs can be a little buggy, which usually means I need to power cycle some of them now and then.

My lights and motion sensors were obviously unaffected (HomeAssistant). My Emporia Vue2 power monitor would possibly have stopped working, except I flashed it with ESPHome firmware, so it’s local only, and of course it was fine. My security cameras (Frigate) were also fine.

If my smart home devices are going to stop working, it will almost certainly be my fault, thank you very much!

I’ve been really impressed with Immich, can’t recommend it enough.

I’d put substitute first, but yours sounds better :)

(I’m a big Immich fan, and I’m taking and sharing photos more than ever before, in part because Immich is awesome, self hosted, and open source [the other part is that I have kids now so I’m taking way more photos that grandparents want to see].)

On low end CPUs you can max out the CPU before maxing out network—if you want to get fancy, you can use rsync over an unencrypted remote shell like rsh, but I would only do this if the computers were directly connected to each other by one Ethernet cable.

Not sure I agree.

First, stocks tend to be highly correlated with “the market” (see financial “β”/“beta coefficient”). For example, look at, say, The Home Depot or Ford Motors. From January 2000 to January 2003 (spanning the dot com bubble) they each lost about a third of their value, yet these are not “dot com”-centric companies.

Second, the promise of AI is that it will help every company that has desk jobs. So every company has this expectation now priced into their stock, and if the bottom falls out, well…

Not an analyst/I don’t pick stocks, but just my 2¢.

If you’re running it via docker compose it’s trivial to upgrade, and there are no breaking changes. Pull, down, up, you’re done.

Frigate is pretty good, too. I’ve only been running it for a few months but I’m very happy with it.