

I have tried putting it on the top when I built it but there isn’t enough clearance. The only thing I can do is rotate the radiator and block :(
I have tried putting it on the top when I built it but there isn’t enough clearance. The only thing I can do is rotate the radiator and block :(
I can’t hear any gurgling. I’m going to try and feel out a small hum in the block. I am quite deaf though so I’ll get a friend to help me with that. Then I’ll check all the connections.
Less than a minute. I’ve just read somewhere that I should be able to feel a small hum in the block, I’m going to check for that next.
Nah I reapplied it again. Every time I take it off I clean it and do it again.
I’ve changed the orientation so that the radiator hoses are at the bottom (front mounted) and the block has the hoses on the side, with the hoses slightly pointing down. It’s still heating up.
The other side
This is what when cooling paste looks like after I’ve taken it off. This first PC I’ve built, so still learning.
The radiator is mounted to the front (no room up top). The hoses fed from the top of the radiator (slightly higher than the block). Should I rotate this around so the hoses come out the bottom?
Yeah it’s essentially a trigger. I have a few purposes. One is for my dumb washing machine plugged into an energy monitoring smart plug. After it registers the washing is done, I’ll get alerts through the house in intervals until I get up and scan the NFC tag on the washing machine (I forget to hang out washing.
As I’m in a rental and I can’t have smart switches so I have smart globes and put tags on the switches to toggle the lights.
One by my bedside table to turn off all the lights and smart plugs.
One on my front door to set my away from home scene.
I also have a signed band poster hung on the wall with one, which opens the album in Spotify.
Good fun.
NFC tags are cheap and fun
I’m having success with TubeSync through docker compose.
Yeah I get that technically he did get what he ordered and you can’t argue with it. Still, it’s dodgy.
In general these are shipped with an NVMe and then the expansion slot is for a 2.5 inch sata sdd. So this has been modified at some point and the seller probably should have stated.
Oh now I’m worried about my order. Got an optiplex 7060 MFF on the way and ordered a sata 2.5inch SSD for expansion. Please be an NVMe!
Agreed. Visually beautiful and morally hard. So difficult to save everyone but I loved it.
I’m using Newpipe but haven’t tried LibreTube. Interested to try it out. How come you prefer it?
For Lidarr I use Lidarr on Steroids (there is also Lidarr extended and a plug in script but I couldn’t get those going). Probably on me because I can’t get nginx going either.
I connected Deemix to it (you need a Deezer account) you can get MP3 for free, and with premium Deezer you can get lossless. All the music you want there.
There is also Soulseek for rare stuff but it’s manual and I cant find a way to connect it to Lidarr.
It’s a light globe for the house that has some sort of connectivity with it. Like wifi, bluetooth, zigbee so that you can control it remotely or automate it.
Ooh nice. I need to figure out some other type of bulb. The ones I have are TP Link Tapo Wifi and they’re too unreliable.
Good question, nah there isn’t.