Fully agreed on the marketing to children. And I think the established and emerging research around the effects of junk food really show the ill effects of our industrialized food supply. See: “The Dorito Effect” by Mark Schatzker; “Sugar” and “Hacking of the American Mind” by Robert Lustig; Good Calories, Bad Calories" by Gary Taubes. Basically, if it wasn’t raw when you bought it, that food is most likely bad for you.

Spurlock didn’t “fail to disclose” his food lists; he steadfastly refused to disclose what he consumed because it would show him, most generously speaking, to be Captain Obvious and at worst to be full of shit.

FWIW, that downvote wasn’t me.

Morgan Spurlock seriously manipulated the experiment to get the results he wanted, like completely stopping his regular exercise regimen while drinking massive amounts of alcohol. A cursory look at the numbers shows that he couldn’t possibly have gained 25 pounds on the diet he claimed he ate. I despise McDonald’s and they deserve all the negative attention, but Spurlock was a grifter and charlatan.

[first time question.jpg]

“Hypocrisy dwells in the soul,” or to use another quote:

Do I contradict myself? Very well then I contradict myself, (I am large, I contain multitudes.) —Walt Whitman

When last I followed the topic, there is a body of science supporting this. The summary of it is: people like to think of the human brain as being integrated, when it’s more of a duct-tape-and-bailing-wire artifact of evolution. Shit got bolted into place over millions of years of evolution. So while things are connected, the parts don’t all necessarily work in unison, especially in morally complex situations or when we feel threatened. It all exists to get us laid and propagate our genetic code. All other consideration are secondary from the perspective of DNA.

And folks, this is why it’s critical that we work on ourselves, study philosophy even if only cursorily, and understand interpersonal dynamics, Instead of tearing each other down, we could be investing energy into lifting up each other.

Edit: formatting. As an aside, how do I get single line breaks in Jerboa/Lemmy? Single CRLFs are ignored.

They were acquired by Opta Group in 2023. Since then, the quality has declined while prices increased. And around the time of their acquisition, they started doing some shady stuff when claiming USB-IF compliance. The cables were blatantly not USB-IF compliant.

Another example: I personally love my Anker GaN Prime power bricks and 737. Unfortunately, among my friends and peers, I am the exception. The Prime chargers are known for incorrectly reading cable eMarkers and then failing to deliver the correct power. This has so far been an issue for me twice, but was able to be worked around.

This is absolutely by design. The corporate raider playbook is well-read. See: Sears, Fluke, DeWalt, Boeing, HP, Intel, Anker, any company purchased by Vista (RIP Smartsheet, we barely knew ye), and so on. Find a brand with an excellent reputation, gut it, strip mine that goodwill, abandon the husk on a golden parachute, and make sure to not be the one holding the bag.

FWIW, I regularly use a Zoom H8 and do my major editing/mixdown in Tenacity, minor quick stuff directly in the H8. I give Ardour a try every few years, and things are definitely getting better. I just don’t have a lot of patience for getting the audio working in Ardour. I still support Ardour because I see that things are improving.

Edit to add: I think it says a lot of good things about the Ardour project that one has to dig a bit to find the donation link. For people who can and want to financially support Ardour, here it is: https://community.ardour.org/donate

The setting that worked for me is “Switch to Bitwig.” :D

But seriously, I never got Ardour to work on any OS, and that seriously bums me out. I’d love to be just that much closer to 100% FOSS.

“It’s what … I do?”

Got a source on that? According to Backblaze, Seagate seems to be doing okay (Backblaze Drive Stats for Q1 2024 https://www.backblaze.com/blog/backblaze-drive-stats-for-q1-2024/), especially given how many models are in operation.

Heat-Assisted Magnetic Recording. It uses a laser to heat the drive platter, allowing for higher areal density and increased capacity.

I am ignorant on the CMR/SMR differences in performance

My read of it was “the C-suite hates when the engineers actually know how shit works, and the leadership must kowtow to the people doing the actual work.” YMMV or the commentor may have meant something completely different.

Oh, I skip FB and IG ads completely. It’s crazy: I didn’t even have to install anything, and the ads just disappeared one day.

But seriously, the “your attention is being monetized” model makes for such an awful experience for me. I’m envious of people who can enjoy the world and the Internet when ads are everywhere.

It came from a speaker a few years ago at the Davos World Economic Forum. Davos is where the ultra rich gather each year to plot out how to be even more evil.

Oh, right! I forgot about all of the LIDAR-equipped planes in maritime communities! Those are way more economical to fly than any sUAS. /s in case that wasn’t obvious.

In case you, or anyone else, were vaguely interested in learning:

-kelp extent mapping needs to be done in repeatable fashion, specifically at low tide; we can put up an sUAS any time

-the communities most in need of monitoring absolutely cannot afford to send planes up monthly

-many of the kelp beds in the PacNW are in restricted airspace; it is much easier to get an FAA clearance to perform low-altitude surveys using sUAS

-that restricted airspace I mentioned? Some of these kelp beds are on approach paths for the airspace. Even if a plane were the preferred choice for surveying, the planes are unable to fly in the pattern we need

-(drifting a touch off your point of LIDAR-equipped planes) satellite imagery with the required resolution is prohibitively expensive

-most construction projects wouldn’t use a plane for tasks such as volumetric or area analysis

Consumer drones are quickly becoming the preferred, economical means for kelp health analysis, especially for communities that can’t afford planes or purchasing satellite imagery.

This “lonely adult” uses drones for aerial mapping and survey. This Summer’s huge project is a workflow I developed to map the extent of PacNW bull kelp forests in order to provide year-over-year health metrics. Using sUAS for this is way more automated, economical, repeatable, and granular than using airplanes and satellites, therefore within reach of those communities monitoring kelp health.

DJI hits the sweet spot of capabilities, compatibility, and cost. Skydio (go USA!) has abandoned the consumer/enthusiast market that built their business. And even before they turned their back on the consumer market, Skydio couldn’t come close to DJI’s hardware. Additionally, Skydio, in true capitalist fashion, locked capabilities away behind software licenses, capabilities that are already built into the drone.

It’s important for countries to have domestic drone manufacturing in the current conditions. But the USA’s actions here smack of protecting companies that just can’t hang.

Stainless steel that gets coated is no longer stainless steel. Stainless steel requires exposure to sufficient oxygen in order to maintain the protective oxide layer.

These are rudder bolts from the same gudgeon on my sailboat. The black stuff is anoxic corrosion.

I can corroborate this. Source: am man.

Instructions unclear. Used boulder. No more sound comes out.

Except the results from DDG are also a dumpster fire of affiliate spam “listicles,” Pinterest garbage, and unrelated SEO BS. Oh, and Reddit sure has risen in all the results since the APIpocalypse. Almost like big business is all starving each other’s backs.

“A lie can travel halfway around the world while the truth is still putting on its shoes.” - Jonathon Swift

So now you’re investing time and effort to publicize why this bill was broken. Your political opposition successfully got you on the defensive. These strategies play a part of why fascism and authoritarianism are succeeding in the USA.